Repaint Wood Furniture Like a Seasoned DIYer

Repainting antiques may seem simple until you actually do it and end up with drips, brushstrokes, or peeling paint in a few weeks. The secret to a piece looking absolutely DIY as opposed to professionally refinished is preparation and skill, more than expensive tools or exceptional talent.

Most novices miss essential steps or rush through them, thereby doing more work for themselves when they need to redo the project from scratch. Understanding the proper sequence and taking time with each phase transforms furniture painting from a frustrating experiment into a satisfying project that produces results worth showing off.

The methods experienced DIYers use aren’t complicated—they just know which shortcuts work and which ones create problems down the road.

Remove all hardware before starting anything

DepositPhotos

Removing knobs, handles, hinges, and ornamentation provides unhampered access to all surfaces and prevents hardware from being painted by mistake. This one is a no-brainer, yet most try to tape off hardware and cut corners on it instead, with no luck.

Label each piece and keep all the screws in small bags, taped to the corresponding hardware, so you don’t have to scramble to find the right pieces when reassembling it. Some screws may be stripped or rusted, so scrutinize them while removing and purchase replacements if necessary.

Clean hardware in separate steps with specialized techniques—brass, iron, and newer metal finishes all need different strategies. Removing hardware also allows you to upgrade to new pieces if the originals are broken or no longer fit your idea for the completed furniture.

Sand carefully through progressive grits

DepositPhotos

Starting with 120-grit sandpaper removes the existing finish and smooths out any rough spots or imperfections in the wood surface. The goal isn’t to strip everything down to bare wood unless the existing finish is severely damaged—you just need to create a slightly rough surface that paint can grip.

Following the first sanding, progress to 220-grit paper for a final smooth sanding that eliminates any scratches from the coarsest grit. Sand in the wood grain direction only to prevent visible scratches that will appear through the paint.

Sanding flat areas using a sanding block instead of holding sandpaper in your hand can result in uneven pressure and wavy surfaces. Good sanding takes longer than most expect, but taking shortcuts here can lead to paint adhesion problems later.

Remove all trace of dust

DepositPhotos

Sanding generates fine dust that settles in all crevices and will ruin your paint job if not removed completely. Vacuum using a brush attachment to pull dust from corners and details that wiping can’t reach.

Finish vacuuming with a tack cloth—a mildly sticky cloth that is specifically made to pick up minute particles without depositing residue. Others use wet rags, which gets the job done but means waiting for the wood to dry thoroughly before painting.

Inspect your work surface and floor as well, because dust that comes from there will blow onto damp paint and make it have a gritty finish. This slow cleaning makes a big impact on how level your topcoat finish will look.

Apply primer just for furniture

DepositPhotos

Primer creates an even surface that enables paint to adhere well and prevents tannins in the wood from seeping through and discoloring your topcoat. Oil-based primers make the strongest seal against sip-through but require mineral spirits to clean up with and dry longer.

Soap and water effectively clean up water-based primers and evaporate rapidly, so they are handy for most furniture projects. Use primer smoothly with a good synthetic brush or foam roller that is not textured.

Don’t forget edges, corners, and any carved decorations—these surfaces are most likely to wear away over time. One coat of primer can be used on painted furniture, but unfinished wood or very dark-stained pieces can take two coats to completely cover them.

Choose paint based on durability needs

DepositPhotos

Furniture paint is subjected to more abuse than wall paint, so the right choice is important. Chalk paint is in favor because of the minimal prep it requires and the matte, vintage look it produces, but it’s softer and scratches more than other options.

Latex or acrylic paints, most often a ‘furniture’ or ‘cabinet’ type, have a harder resin and resist scratches and chips better. Oil-based paints have the most durable finish but have a more potent scent, dry for the longest time, and require chemical solvents to clean up.

For pieces that get a lot of use like a dining table or dresser, prioritize durability over convenience. Busy furniture is worth the extra cost to have paint that lasts longer than cheap paint that must be repainted every year because the finish faded off.

Apply thin coats instead of a single coat

DepositPhotos

The need for full coverage in a single coat creates drips, sags, and uneven drying that create texture problems. Thin coats dry faster, fill out more evenly, and give more uniform coverage than a single coat.

Fill your roller or brush halfway rather than dunking it full in the paint—too much paint causes all those things you’re trying to avoid. Figure on applying at least two coats, possibly three for light colors over dark wood or when you’re switching colors radically.

Let each light coat dry completely before putting on the next, so pieces of furniture take days rather than a whole afternoon. Application patience prevents sanding over errors and re-painting entire sections.

Use a wet edge when painting

DepositPhotos

Painting in manageable sections small enough to complete before paint can dry prevents wet paint over dry paint and lap marks from being seen. Start at the top of the vertical surface and work downward, keeping the leading edge moist while moving across the piece.

At the table tops or the big, broad surfaces, work in strips side to side without breaking halfway. If you must break, break at a natural edge or corner, not halfway across a surface.

This continuous process requires planning your process ahead of time before you even start painting rather than doing it on the fly as you are painting. Professional results are the result of reasoning out the entire piece and then painting it in a logical sequence that minimizes starting and stopping.

Use a foam roller on flat smooth areas

DepositPhotos

Brushes leave visible brush stroke marks no matter how careful you are, but foam rollers create a nearly spray-painted smooth finish on flat areas like table tops, dresser edges, and cabinet doors. Use a small four-inch foam roller for most furniture pieces—full-size rollers are too unwieldy for the size of furniture work.

Roll in barely overlapping rows with firm, consistent pressure, and move fairly quickly to maintain that wet edge. The foam texture determines the final surface smoothness, with denser foam producing finer finishes than coarser ones.

You will still need brushes for painting intricate parts, carved areas, and tight angles, but roll out open areas and the finished look is considerably improved.

Sand lightly between coats for pro finishes

DepositPhotos

After every coat dries, 320-grit sandpaper or a sanding sponge gets applied lightly to remove any dust particle, bristle, or small imperfections that made it into the wet paint. The process makes the next coat adhere better and develops an increasingly smoother surface.

Sand ever so gently—you’re removing texture, not stripping paint. Wipe clean the sanding dust with a tack cloth before the next coat is applied. It is what makes the difference between furniture that looks hand-painted and furniture that looks factory-finished.

It subtracts time from the project but the combined effect of multiple coats gives that glass-smooth look that makes people wonder where you bought the piece.

Provide enough curing time before subjecting it to heavy use

DepositPhotos

Paint may take on a stiff, dry feel within a few hours, but complete curing takes much longer—weeks, sometimes—depending on the paint type and environment. Hasty attempts to place furniture in service result in scratches, scuffs, and impressions from items placed upon the surface.

Consult the label on the paint can for specific curing instructions, which range wildly depending on paint type. Chalk paint is faster to dry than latex, and latex faster than oil-based.

During drying time, be careful and do not place items on surfaces or close drawers all the way if they stick slightly. Temperature and humidity affect rate of curing, with warm dry conditions promoting faster drying than cold wet environments.

Seal high-usage surfaces with polyurethane or wax

Flickr/Shellie Mitchell

Finished furniture is also assisted by a clear topcoat that will resist scratches, moistness, and everyday wear. Water-based polyurethane provides lasting protection without yellowing white or light-colored paint, but otherwise alters the degree of sheen.

Wax provides a softer, natural appearance and can be buffed to your degree of preferred shine, but must be re-applied every few months on high-traffic items. Topcoat using the same methods as paint—apply a thin coat with sufficient time in between for drying.

Two or three coats of sealer on items like tabletops, chair seats, and dresser tops make a significant difference in the longevity of your paint. Don’t skip the sealer on items that won’t be touched often, but do apply it to items that are used frequently.

Correct drips immediately while wet

DepositPhotos

The moment you notice a drip or run forming, smooth it out with your brush before it dries. Repairing dried drips is a daunting task that involves sanding them off and repainting the entire area.

Keep a damp cloth handy to catch drips on the floor or work surface before they dry into indelible stains. Look at your work from every angle while painting because light from every direction illuminates drips that might go unnoticed from one position.

Ceiling lighting especially helps to detect flaws on surfaces that are placed horizontally. Having good lighting for work prevents most problems from arising in the first place, but mistakes do occur and finding them in time makes a huge difference.

Paint in drawers and small spaces

DepositPhotos

Experienced DIYers don’t skip parts that are not visible because completing all over well avoids unevenly dried wood to warp and absorb moisture in the years ahead. Paint or seal backs of items, inside drawers, and undersides even though no one will see them.

These surfaces don’t require the same careful multi-coat process as parts that are viewable—a coat or two of primer or remaining paint is adequate protection. This attention also prevents that lingering, unfinished smell that plywood and rough wood have, which is transferred to clothing or other objects that are stored in the piece.

Tracking a piece through to the end, even items nobody ever sees, is part of what makes it really refinished and not just cosmetically updated.

Work in a well-lighted area with good ventilation

DepositPhotos

Paint fumes, even those from low-VOC paint, accumulate inside and cause headaches or lightheadedness if the air is not well circulated. Have windows open, use fans, or work out of a garage with the door slightly ajar to circulate the air.

Proper lighting is also required because shadows hide imperfections, drips, and missed spots which become embarrassingly obvious when the job gets moved to its ultimate location. Natural light reflects color most truly and surface texture more distinctively than man-made light, so having your work by a window is an advantage.

Bring-on work lights enable you to adjust angles to eliminate shadows in corners and fine details. Preparing the environment properly in the right way makes painting simpler and has better results without any additional ability.

From shabby to showpiece

DepositPhotos

Painting furniture turns products that would otherwise end up in landfill into items that perfectly fit your house and you. The methods involved aren’t necessarily technical—simply patience and following a reasonable step-by-step system without skipping the dry parts.

What could seem like a weekend project really does take longer if you include proper drying time between coats, but the extended time frame prevents hurrying and errors that need to be redone.
A well-painted piece of furniture will survive for years and endure moves, style changes, and everyday use but will still be functional and adored-looking.

The key to amateur vs. professional-grade results isn’t talent or expensive equipment—it’s simply understanding that preparation is equal to the painting itself, and that the best finish comes from applying several thin coats rather than trying to get it all at once.

More from Home As We Make It

DepositPhotos

Like Home As We Make It‘s content? Follow us on MSN.

Similar Posts