29 Wall Clocks and Barometers Collectors Keep an Eye On
A wall clock is one of the few antiques that still has a job to do, and a barometer is one of the few that argues with the weather forecast. Both hang in plain sight, both were made in enormous numbers, and both hide their identity on the back of the dial or the plate of the movement.
Knowing where to look is the difference between a fifty-dollar decorator piece and something a specialist auction would take. What follows runs through the makers, forms and dating clues that keep the trade interested, and where the money actually sits.
Seth Thomas Regulator No. 2

The Regulator No. 2 hung in railroad depots and post offices for decades, built by Seth Thomas of Thomaston, Connecticut from roughly the 1860s well into the twentieth century. Look for an eight-day weight-driven movement stamped with the company name, a wooden rod pendulum, and an original reverse-painted lower tablet.
Cases appear in oak, walnut and cherry, usually a little over three feet tall. Reissues from the 1970s exist and sell for a fraction of period examples, with condition and original glass deciding most of that gap.
E. Howard & Co. Banjo Wall Clocks

E. Howard & Co. of Boston numbered its banjo wall clocks by size, from the imposing No. 1 down to the compact No. 5, and earlier examples carry the Howard & Davis signature used before the later firm name came into use in the 1850s. Original cases show gilt or grain-painted finishes with reverse-painted throat and base tablets.
Repainted dials and replacement glass cut value sharply. Sound, original examples reach into the thousands while refinished ones trail well behind.
Simon Willard Patent Timepieces

Simon Willard patented his eight-day wall timepiece in 1802 from Roxbury, Massachusetts, and the shape became the banjo clock everyone recognizes. Genuine examples run without a strike, use a weight-driven movement with a T-bridge, and often carry a Willard patent inscription on the throat tablet.
Nineteenth-century imitations and twentieth-century reproductions are far more common than the real thing. Provenance, an untouched dial and original glass carry the price; a modern copy is decorative rather than collectible.
Ansonia Long-Drop Regulators

The Ansonia Clock Company began in Connecticut in the 1850s, moved production to Brooklyn in 1878, and sold its machinery to the Soviet Union in 1929, which caps the dating range neatly. Wall models include long-drop regulators in oak and walnut with pressed decoration around the bezel.
Movements are usually stamped Ansonia Clock Co., New York, and paper labels survive inside many cases. A crisp label, the matching pendulum and an untouched finish separate a strong example from a common one.
Waterbury Wall Regulators

Waterbury Clock Company worked in Connecticut from 1857 until the business became United States Time, the ancestor of Timex, in the 1940s. Its long-drop wall regulators used eight-day movements with the maker’s name stamped on the plates, and printed paper labels inside the case often name the model.
Rosewood-grained and oak cases both turn up. Original hands, dial and tablet matter more than the case timber, and replaced glass typically takes a third off the asking price.
Gilbert Schoolhouse Clocks

The William L. Gilbert Clock Company of Winsted, Connecticut rebuilt after an 1871 fire and turned out schoolhouse wall clocks in quantity. The short-drop octagon shape, with a painted or paper dial behind a hinged bezel and a small glazed door below, is the standard form.
Movements carry the Gilbert stamp, and eight-day time-and-strike versions outnumber plain timepieces. Prices sit at the affordable end of American wall clocks, though a clean original dial can double what a repainted one brings.
New Haven Wall Clocks

New Haven Clock Company opened in 1853 as a movement supplier to the Connecticut trade and outlived most of its rivals, closing in the mid-1950s. Its wall output covers long-drop regulators, gallery dials and later office clocks, with the company name stamped on the movement plates and printed on the dial. Case quality varies a great deal across that century.
Early walnut regulators with original tablets are the ones worth chasing; the 1930s office models remain cheap unless the dial is untouched.
Ingraham Drop Octagon Clocks

E. Ingraham Company of Bristol, Connecticut built its reputation on case design, visible in crisp veneers and neatly molded bezels. Movement plates are stamped with the Ingraham name, and later dials add a Bristol, Connecticut line that helps place them after the firm settled on that trading style.
The business ran under various family names from the 1850s until it was bought out in the late 1960s. Kitchen and office models are plentiful and inexpensive; earlier walnut-cased drop octagons command the real money.
English Fusee Drop-Dial Clocks

English drop-dial trunk clocks hang in pubs and waiting rooms across Britain, typically with a 12-inch painted or silvered dial, a mahogany surround and a shaped trunk below. The giveaway is the fusee movement, a chain or gut line wound around a tapered cone to even out mainspring pull, which American factories rarely bothered with.
Dials are usually signed by the retailer rather than the maker. A single-fusee timepiece with original dial paint and a period winding key is the configuration buyers want.
Vienna Regulators

True Vienna regulators are Austrian Biedermeier pieces from roughly 1800 to 1850, slim glazed cases with dead-beat escapements and delicate wooden pendulum rods. Almost everything sold under the name is a later German product from Gustav Becker of Freiburg or from Lenzkirch, made between about 1870 and 1910 and identifiable by a stamped serial number and trademark on the backplate.
Becker used an anchor beneath a crown; Lenzkirch used a shield carrying the factory initials. The value gap between the two groups is enormous.
French Comtoise and Morbier Clocks

Comtoise clocks, also called Morbier clocks after a village in the Franche-Comté, use a tall iron and sheet-brass movement hung on the wall above a long pendulum with an embossed brass bob shaped like a lyre or a wheat sheaf. The signature habit is the repeated strike: the hour sounds, then sounds again about two minutes later.
A verge escapement points to the eighteenth century, an anchor escapement to the nineteenth. Complete examples with original weights and an unchipped enamel dial are worth several times a stripped movement.
Black Forest Cuckoo Clocks

Black Forest cuckoo clocks are dated by movement, not by carving. One-day movements run about thirty hours and need daily winding; eight-day versions cost more new and hold value better.
Names worth finding include Anton Schneider Söhne of Schonach and Hubert Herr of Triberg, both long-established family workshops, along with movements supplied by Regula. A VDS certificate confirms Black Forest manufacture rather than an import.
Carved hunting cases with original bellows leather and undamaged chains fetch multiples of a battery imitation.
Junghans Wall Clocks

Junghans of Schramberg opened in 1861 and grew into the largest clock factory in the world by the early twentieth century, which is why its wall clocks surface everywhere. The eight-pointed star trademark on the dial or movement is the quickest identifier, and case styles track the decades from carved Gründerzeit work to spare postwar shapes.
The Max Bill designs of the mid-1950s are the collector favorites and remain in production, so establish whether a piece is period or current. Original finish drives the premium.
Kienzle Office and Kitchen Clocks

Kienzle grew from a Schwenningen workshop founded in 1822 and became a household name in German timekeeping alongside Junghans. Its wall clocks range from heavy oak regulators to slim Bauhaus-influenced office dials of the 1930s, then plastic-cased kitchen models after the war.
Movements are stamped with the Kienzle name and often a number that helps place the decade. Mid-century designs have climbed in price, while common kitchen clocks stay inexpensive unless dial and hands are flawless.
The Jaeger-LeCoultre Atmos

The Atmos by Jaeger-LeCoultre draws its power from temperature: a sealed capsule of gas expands and contracts, winding the mainspring from a swing of a degree or two. It stands on a shelf rather than hanging, but it sits in most serious clock collections anyway.
Serial numbers date individual examples, and the Atmos II of the later 1930s marks the beginning of the modern line. Servicing is specialist work and expensive, so a non-runner is worth a fraction of a serviced one.
Telechron and General Electric Synchronous Clocks

Henry Warren’s Telechron of Ashland, Massachusetts made synchronous electric clocks that took their timekeeping from the frequency of the power grid, and General Electric sold the same movements under its own name after acquiring the firm. The rotor is the dating clue: sealed motor units carry letter codes, and a dead rotor is the usual reason one of these clocks stops.
Deco-era wall models in chrome and mirrored glass are the ones collectors chase. A working original rotor lifts the price well above a case fitted with a modern quartz movement.
George Nelson Sunburst Clocks for Howard Miller

George Nelson’s office designed a run of wall clocks for Howard Miller of Zeeland, Michigan beginning in the late 1940s, with Irving Harper responsible for much of the drawing work. The Sunburst, model 2202, and the spiked Asterisk are the most recognizable shapes.
Period examples show a stamped or foil label, aged brass or painted rays, and an original motor rather than a battery retrofit. Vitra and Howard Miller reissues are legitimate but sell for far less than a documented original in unrestored condition.
The Kit-Cat Klock

The Kit-Cat Klock has rolled its eyes and swung its tail since 1932, when Earl Arnault designed it, and the California Clock Company has produced it more or less continuously since. Early electric versions in period plastics with cloth cords are the collectible ones; later battery models are worth a few dollars.
Check the tail linkage, the eye mechanism and the paint, since crazing and repaints are common. Rare color variants and licensed editions bring premiums that have little to do with age.
Railway and Station Dial Clocks

Railway platform clocks were built to be read at distance, with dials of 14 inches and upward, fusee movements and a heavy mahogany or oak surround. British examples often carry a company mark or painted initials such as GWR or LMS, though those markings are also the easiest thing to fake.
On the Continent, Hans Hilfiker’s 1944 design for the Swiss Federal Railways became the licensed Mondaine dial. Documented railway provenance can multiply the price of an otherwise ordinary dial clock.
Master and Slave Clock Systems

Electric master clock systems drove dozens of slave dials around a school, factory or telephone exchange from a single precision pendulum. Synchronome, founded by Frank Hope-Jones, and Gents’ of Leicester with its Pul-syn-etic system are the two British names that matter.
The master sends an impulse at fixed intervals and the slave dials merely follow, which is why a lone slave dial is nearly worthless while a complete master in its glazed case is not. Original gravity arms and undamaged wheelwork decide condition.
Tavern Clocks and the Act of Parliament Myth

Tavern clocks are large English timepieces with black japanned dials two to three feet across, made to be read across a crowded public room from about 1720 onward. The popular label Act of Parliament clock refers to a short-lived 1797 clock tax repealed the following year, decades after the form appeared, so the name is a Victorian invention rather than a fact.
Genuine examples are weight-driven timepieces without strike, signed on the dial. Original japanning and gilt decoration, which flake easily, are what buyers pay for.
Aneroid Wall Barometers

Aneroid barometers replaced mercury with a sealed metal capsule that flexes as pressure changes, a design patented by Lucien Vidi in 1844. Wall models turn up in carved oak, in gilt brass, and in the round French holosteric pattern with movements by Naudet carrying a PHNB stamp.
The dial usually names a retailer rather than the actual maker. These instruments drift out of calibration over decades, so a seller’s claim that one reads correctly deserves checking against a known reference before money changes hands.
Stick Barometers by Negretti & Zambra

Stick barometers hold a real column of mercury behind a slim mahogany or rosewood case, with an engraved brass or silvered register plate and a vernier for precise reading. Negretti & Zambra of London, trading from 1850, is the signature most often seen, alongside Dollond and Adie.
Kew-pattern marine versions use a restricted bore to damp the motion of a ship. Mercury complicates shipping and resale, and a tube that has been emptied or refilled affects both value and legality in some markets.
Banjo-Form Wheel Barometers in Mahogany

Wheel barometers, called banjo barometers for their outline, hide a mercury siphon behind a mahogany or rosewood case and read pressure on an 8 or 10 inch silvered dial. Better examples stack a thermometer, a hygrometer, a spirit level and a small convex mirror down the case.
Many are signed by the Italian-born makers who dominated the London trade, names such as Ronchetti and Bianchi, while shell and stringing inlay place the case in the Regency period and after. Replaced dials and re-silvered plates are the common faults.
Admiral FitzRoy Storm Barometers

Admiral Robert FitzRoy, who captained the Beagle and later ran Britain’s first forecasting office, lent his name to storm barometers sold with printed weather rules across the paper scale. The classic form is a mercury tube in an oak case with a gabled or gothic top and a thermometer alongside.
Original printed scales, foxed but legible, are preferred to bright modern replacements, which are widely available. Twentieth-century reproductions are numerous, so case timber, glass and the style of the printing all deserve a close look.
Ships’ Bulkhead Barometers

Ships’ bulkhead barometers are aneroid instruments in heavy chrome or brass drum cases, built to be screwed to a wall at sea. Sestrel, the trade name of Henry Browne & Son, and Short & Mason of London are the two marks most often encountered, with German-made Wempe examples also in circulation. Look for the maker’s name on the dial, a serial number on the back plate, and original screws in the mounting flange.
Pitting on the chrome and a repainted dial pull the price down quickly.
Barographs and Their Paper Charts

A barograph draws a week of pressure onto a paper chart wrapped around a clockwork drum, driven by a stack of aneroid capsules and an inked pen arm. Short & Mason and Negretti & Zambra made many of the survivors, usually in a glazed mahogany or oak case with a drawer beneath for spare charts.
Completeness is everything here: original drum, pen arm, ink bottle, chart supply and key. A missing pen arm or a seized drum movement turns a strong instrument into a project.
Combination Weather Stations

Combination weather stations put a barometer, a thermometer and a hygrometer on one backboard, usually oak or walnut, and were a standard hallway fixture from the Edwardian era to the 1960s. American mid-century examples come from Taylor Instrument Companies of Rochester, New York and from Airguide of Chicago, often in brass and aluminum rather than timber.
The hygrometer, which relies on a hair or treated paper element, is the part that usually fails first. Matching original instruments outsell mixed sets by a wide margin.
Matched Clock and Barometer Sets

Matched pairs of a clock and an aneroid barometer, mounted on a shared plaque or sold as facing brass drums, were popular presentation gifts and remain common on the secondhand market. Sestrel, Smiths of England and Schatz of Germany all produced them, the clock usually running an eight-day platform escapement movement.
Value depends heavily on the pair staying together, ideally with matching serial numbers or identical case finishes. Split sets are worth noticeably less than the same two instruments offered as one lot.
What the Backplate Remembers

Every item on this list was made to be useful, and most were made in the tens of thousands. What separates the pieces that hold value is not rarity so much as honesty: an unrestored dial, a movement that still carries its stamp, a case that has not been sanded back to bare timber by a well-meaning owner.
Originality is the currency, and it cannot be added later.
That is also why the trade spends so much time squinting at backplates and register plates rather than admiring the front. The dial tells you what someone wanted the object to look like; the movement tells you who made it and roughly when.
Buy the second one and the first tends to take care of itself.
More from Home As We Make It

- 18 Affordable Places to Retire in the U.S.
- Antique Glassware That’s Worth Collecting
- Stay-At-Home Jobs That Actually Pay
- 18 Forgotten Snacks from the ’80s and ’90s
- 20 Things That Make a House Look Cleaner Than It Is
Like Home As We Make It‘s content? Follow us on MSN.
